Watch our new Home Golf Simulator Build Video where we take the Carl’s Place Golf Simulator Enclosure and do a full review and DIY Build! We will show you how we took this Carls Premium 16:9 Golf Simulator Enclosure that measures 13ft wide and 7′ 7″ tall and built the entire thing with only one person. We will then take shots using the Flightscope Mevo+ & Foresight Sports GCQUAD to demonstrate and review the sound of the golf simulator enclosure screen, image quality, and ball bounce back. If you are looking to purchase a Carl’s Golf Enclosure please consider using the links below to help support the channel! If you are looking to build your own home Golf Simulator and need any Hardware or Software be sure to email me at: Email Jay
Quick buy: Carl's Place enclosures and screens
- Carl's Place enclosures and screens5% off at Carl's Place. GSV emails you the code.
Buying through GSV's links and codes helps support the channel: GSV earns a small commission at no extra cost to you, and you still get every saving available.
All Enclosures & Screens
See it at Carl's Place
DIY Enclosures
See it at Carl's Place
Buy Mevo+ Here: Mevo+: See it at Shop Indoor Golf
SkyTrak: See it at Shop Indoor Golf
R10 See it at Shop Indoor Golf
Projectors: https://topshelfgolf.com/collections/optoma-golf-simulator-projectors?aff=2
Email me for Foreisght GCQuad, GC3, Bushnell Launch Pro, etc. at: Email Jay
#homegolfsimulator #carlsgolfenclosure #diygolfsimulator #golfsimulator #carlsgolf #diygolfsimulatorenclosure #golfer #golfing #golfsimulatorreview #bestgolfsimulator
To kick things off I am going to take you through a full run down and review all of the components I used for this Home Golf Simulator Build including the turf, mat, projector, golf simulator enclosure, etc. and then show you a time-lapse of how this was a true DIY Golf Simulator Build as I completed this all on my own in just over an hour. After the time-lapse I will take several demonstration shots using the Flightscope Mevo+ and even Driver with Foresight Sports GCQUAD Golf Launch Monitor and new FSX Play Golf Simulator Software. To wrap things up we will watch a 4K movie clip using the BenQ LK953ST and Carl’s 16:9 Golf Simulator Enclosure. I hope you enjoy this video as much as I did making it!
About the Flightscope Mevo+
The Flightscope Mevo+ launch monitor is a radar based device that can work both indoor and outdoor for golf data and golf simulator use. Mevo+ provides Carry Distance, Club Head Speed, Smash Factor, Apex Height, Flight Time, Ball Speed, Vertical Launch Angle, Horizontal Launch Angle, Lateral Landing, Angle of Attack, Total Distance, Roll Distance, Spin Axis, Spin Rate and Spin Loft.
About the GCQUAD
The Foresight Sports GCQuad is a portable golf launch monitor that is high-speed camera and infrared based. The Quadrascopic technology takes detailed pictures of the ball and club still while still allowing the the unit to be placed almost two feet across from the ball on the ground. This advanced camera technology allows the Foresight GCQuad to be a simple setup in most environments from outdoor driving ranges to smaller indoor simulator rooms,
Whether you are an amateur just getting started or a golf professional looking to give advanced instruction, the Foresight GCQuad can accommodate. Take a look at the detailed information we have provided below and if you are interested in purchasing a Foresight Sports Product such as the GCQuad Golf Launch Monitor we can help, CONTACT US today.
If you are looking to do your own home golf simulator build you should start with looking at the size of space you are working with. Optimal dimensions for a home golf simulator are 15′ wide by 10′ tall and 20ft long. These can be adjusted depending on the final setup but this size golf simulator allows for right and left handed players from the center, a comfortable height, and length to accommodate radar or camera based golf launch monitors. If you are looking to use a Carl’s DIY Golf Simulator Enclosure you need to be sure you have around 2′ of space behind the screen for a buffer of movement as well. Doing your own DIY Home Golf Simulator Build can be easier than you think, just plan ahead and be sure you gather all components before starting. I am always happy to help connect any of my viewers for Golf Simulator hardware or software. You can email me at: Email Jay
Chapters
00:00 Home Golf Simulator Intro
01:28 Carl’s Golf Simulator Enclosure Format
03:33 Golf Simulator Build Walk Thru
06:53 Golf Simulator Build Time-Lapse
08:50 Flightscope Mevo+ Demo Shots
11:06 GCQUAD & FSX Play Driver Demo Shot
13:13 4K Movie on Carl’s Premium Screen
14:11 Home Golf Simulator Wrap Up & Review
Where to buy Carl's Place enclosures and screens
- Carl's Place enclosures and screens5% off at Carl's Place. GSV emails you the code.
Free consultation. GSV's partner master builders, hand-picked by Jay, get on a call quickly and make sure everything fits, with package deals, DIY packages, full installation and more.
Get a free consultationPrices are on the shop's page.
Build the rest of your sim
- Hitting mat$20 off at Shop Indoor GolfShop
- Projector5% off at Shop Indoor Golf. First-time buyersShop
- Simulator computerSurfThing: $100 off applied automatically, no codeShop
- TouchscreenGSV code for TouchscreenGuruShop
- Complete package$250 off at Shop Indoor GolfShop
GSV earns a small commission on these links, at no extra cost to you. Shop Indoor Golf takes one code per order.